Magnetic Field of a Current Loop, Sources of Magnetic Fields | University Physics Volume 2

Learning objectives

By the end of this section, you will be able to:

Explain how the Biot-Savart law is used to determine the magnetic field due to a current in a loop of wire at a point along a line perpendicular to the plane of the loop.
Determine the magnetic field of an arc of current.

The circular loop of CNX_UPhysics_29_04_Icircle has a radius R, carries a current I, and lies in the xz-plane. What is the magnetic field due to the current at an arbitrary point P along the axis of the loop?

View original figure (external; image not reproduced in this text edition)

Original figure description: Figure shows a circular loop of radius R that carries a current I and lies in the xz-plane. Point P is located above the center of the loop. Theta is the angle formed by a vector from the loop to the point P and the plane of the loop. It is equivalent to the angle formed by the vector dB from the point P and the y axis.

Determining the magnetic field at point P along the axis of a current-carrying loop of wire.

We can use the Biot-Savart law to find the magnetic field due to a current. We first consider arbitrary segments on opposite sides of the loop to qualitatively show by the vector results that the net magnetic field direction is along the central axis from the loop. From there, we can use the Biot-Savart law to derive the expression for magnetic field.

Let P be a distance y from the center of the loop. From the right-hand rule, the magnetic field $d \vec{B}$ at P, produced by the current element $I d \vec{l},$ is directed at an angle $θ$ above the y-axis as shown. Since $d \vec{l}$ is parallel along the x-axis and $\hat{r}$ is in the yz-plane, the two vectors are perpendicular, so we have

d B = \frac{μ_{0}}{4 π} \frac{I d l \sin π /2}{r^{2}} = \frac{μ_{0}}{4 π} \frac{I d l}{y^{2} + R^{2}}

where we have used $r^{2} = y^{2} + R^{2} .$

Now consider the magnetic field $d {\vec{B}}^{'}$ due to the current element $I d {\vec{l}}^{'},$ which is directly opposite $I d \vec{l}$ on the loop. The magnitude of $d {\vec{B}}^{'}$ is also given by fs-id1166167223300, but it is directed at an angle $θ$ below the y-axis. The components of $d \vec{B}$ and $d {\vec{B}}^{'}$ perpendicular to the y-axis therefore cancel, and in calculating the net magnetic field, only the components along the y-axis need to be considered. The components perpendicular to the axis of the loop sum to zero in pairs. Hence at point P:

\vec{B} = \hat{j} \int_{loop} d B \cos θ = \hat{j} \frac{μ_{0} I}{4 π} \int_{loop} \frac{\cos θ d l}{y^{2} + R^{2}} .

For all elements $d \vec{l}$ on the wire, y, R, and $\cos θ$ are constant and are related by

\cos θ = \frac{R}{\sqrt{y^{2} + R^{2}}} .

Now from fs-id1166167417118, the magnetic field at P is

\vec{B} = \hat{j} \frac{μ_{0} I R}{4 π {(y^{2} + R^{2})}^{3 / 2}} \int_{loop} d l = \frac{μ_{0} I R^{2}}{2 {(y^{2} + R^{2})}^{3 / 2}} \hat{j}

where we have used $\int_{loop} d l = 2 π R .$ As discussed in the previous chapter, the closed current loop is a magnetic dipole of moment $\vec{μ} = I A \hat{n} .$ For this example, $A = π R^{2}$ and $\hat{n} = \hat{j},$ so the magnetic field at P can also be written as

\vec{B} = \frac{μ_{0} μ \hat{j}}{2 π {(y^{2} + R^{2})}^{3 / 2}} .

By setting $y = 0$ in fs-id1166167108123, we obtain the magnetic field at the center of the loop:

This equation becomes $B = μ_{0} N I / (2 R)$ for a flat coil of N loops per length. It can also be expressed as

\vec{B} = \frac{μ_{0} \vec{μ}}{2 π R^{3}} .

If we consider $y ≫ R$ in fs-id1166167274964, the expression reduces to an expression known as the magnetic field from a dipole:

\vec{B} = \frac{μ_{0} \vec{μ}}{2 π y^{3}} .

The calculation of the magnetic field due to the circular current loop at points off-axis requires rather complex mathematics, so we’ll just look at the results. The magnetic field lines are shaped as shown in CNX_UPhysics_29_04_Magloop. Notice that one field line follows the axis of the loop. This is the field line we just found. Also, very close to the wire, the field lines are almost circular, like the lines of a long straight wire.

View original figure (external; image not reproduced in this text edition)

Original figure description: Figure shows the magnetic field lines of a circular current loop. One field line follows the axis of the loop. Very close to the wire, the field lines are almost circular, like the lines of a long straight wire.

Sketch of the magnetic field lines of a circular current loop.

Magnetic Field between Two Loops

Two loops of wire carry the same current of 10 mA, but flow in opposite directions as seen in CNX_UPhysics_29_04_2loops. One loop is measured to have a radius of

R = 50 cm

while the other loop has a radius of

2 R = 100 cm .

The distance from the first loop to the point where the magnetic field is measured is 0.25 m, and the distance from that point to the second loop is 0.75 m. What is the magnitude of the net magnetic field at point P?

View original figure (external; image not reproduced in this text edition)

Original figure description: Figure shows two loops of radii R and 2R with the same current but flowing in opposite directions. Point P is located between the centers of the loops, at a distance 0.25 meters from the center of the smaller loop and 0.75 meters from the center of the larger loop.

Two loops of different radii have the same current but flowing in opposite directions. The magnetic field at point P is measured to be zero.

Strategy

The magnetic field at point P has been determined in fs-id1166167108123. Since the currents are flowing in opposite directions, the net magnetic field is the difference between the two fields generated by the coils. Using the given quantities in the problem, the net magnetic field is then calculated.

Solution

Solving for the net magnetic field using fs-id1166167108123 and the given quantities in the problem yields

\begin{matrix} B & = & \frac{μ_{0} I R_{1}^{2}}{2 {(y_{1}^{2} + R_{1}^{2})}^{3 / 2}} - \frac{μ_{0} I R_{2}^{2}}{2 {(y_{2}^{2} + R_{2}^{2})}^{3 / 2}} \\ B & = & \frac{(4 π \times 10^{−7} T \cdot m/A) (0.010 A) {(0.5 m)}^{2}}{2 {({(0.25 m)}^{2} + {(0.5 m)}^{2})}^{3 / 2}} - \frac{(4 π \times 10^{−7} T \cdot m/A) (0.010 A) {(1.0 m)}^{2}}{2 {({(0.75 m)}^{2} + {(1.0 m)}^{2})}^{3 / 2}} \\ B & = & 5.77 \times 10^{−9} T to the right . \end{matrix}

Significance

Helmholtz coils typically have loops with equal radii with current flowing in the same direction to have a strong uniform field at the midpoint between the loops. A similar application of the magnetic field distribution created by Helmholtz coils is found in a magnetic bottle that can temporarily trap charged particles. See Magnetic Forces and Fields for a discussion on this.

Summary

The magnetic field strength at the center of a circular loop is given by $B = \frac{μ_{0} I}{2 R} (at center of loop),$ where R is the radius of the loop. RHR-2 gives the direction of the field about the loop.

Conceptual Questions

Is the magnetic field of a current loop uniform?

What happens to the length of a suspended spring when a current passes through it?

The spring reduces in length since each coil will have a north pole-produced magnetic field next to a south pole of the next coil.

Two concentric circular wires with different diameters carry currents in the same direction. Describe the force on the inner wire.

Problems

When the current through a circular loop is 6.0 A, the magnetic field at its center is $2.0 \times 10^{−4} T .$ What is the radius of the loop?

0.019 m

How many turns must be wound on a flat, circular coil of radius 20 cm in order to produce a magnetic field of magnitude $4.0 \times 10^{−5} T$ at the center of the coil when the current through it is 0.85 A?

A flat, circular loop has 20 turns. The radius of the loop is 10.0 cm and the current through the wire is 0.50 A. Determine the magnitude of the magnetic field at the center of the loop.

$N \times 6.28 \times 10^{−5} T$

A circular loop of radius R carries a current I. At what distance along the axis of the loop is the magnetic field one-half its value at the center of the loop?

Two flat, circular coils, each with a radius R and wound with N turns, are mounted along the same axis so that they are parallel a distance d apart. What is the magnetic field at the midpoint of the common axis if a current I flows in the same direction through each coil?

$B = \frac{μ_{o} I R^{2} N}{{({(\frac{d}{2})}^{2} + R^{2})}^{3 / 2}}$

For the coils in the preceding problem, what is the magnetic field at the center of either coil?

Attribution. University Physics Volume 2, OpenStax, Rice University, and the contributing authors credited in the book. Licensed under Creative Commons Attribution 4.0 International. Source revision db44eb99e9 of openstax/osbooks-university-physics-bundle (2026-02-02). CC BY 4.0. Original source ↗. Text edition of a pinned CC BY 4.0 source revision of the OpenStax book, converted from CNXML by the EvidenceHelix importer. Original prose, learning objectives, tables, exercises, glossary and captions are preserved; images are not copied (figures link to the original source and keep their credits). No new content was added. Later revisions of this book can carry different licence terms and are not used.